SHEAR (CUTTING MACHINE)
The performance of our guillotine shear (hydraulic metal sheet
model: serials QC11K
1. the frame and blade’s holder are both welded construction, vibration
to eliminate stress with good precision.
2. the gap between top and bottom blades could be adjusted by hand
wheel easily and promptly.
3.rectangular blade has for edges to use to prolong service service
life, the cutting angle could be adjusted to relif the deflection
of working piece.
2. Closed loop control system is composed of NC controller and
the encoder. NC controller has the automatic function of inspection
and compensation. The back gauge is driven by DC servo motor, the
positioning precision of the back gauge, the parallelism of the
sheet to be cut off and the precision of the shear size can be
ensured. After inputting precomputed data, the back gauge can be
automatically moved, positioned, stopped and retraction when cutting.
X axis repeat positioning accuracy: 0. 1mm.
3. Protective fence and the safety interlocker to ensure the operation
safety. Power supply switch that is set in the electric box will
be automatically turned off when the box's door is opened or the
fence is turned up. Protecting barrier with safety interlocker
is mounted on the back of the machine. Another, there are travel
limit protection and foot pedestal mounted emergency off switch.
4.the back gauge is controlled by E200 or DA-310 control system.
Screw of back gauge adopt ball screw.
5. it is possible that gap
between top and bottom blades could be automatic adjusted through