HYDRAULIC PRESS BRAKE(BENDING
The performance of our this type of hydraulic press brake( metal
sheet bending machine):
1. The frame is steel-welded construction, vibrating to eliminate
stress, with high strength and good rigidity.
2. Forcing-torsion shaft maintains the synchronization of both cylinders
with high precision.
3. Mechanic stop nuts ensure stable and reliable positioning accuracy.
4. The ram is driven by hydraulic system with two cylinders. Working
pressure could be adjusted stepless and the noise of machine is
5. The stroke of ram and back gauge could by adjusted through motor;
Also it could be adjusted by hand wheel for fine position. The value
adjusted could be displayed on numerator.
6. Main sliding parts such as cylinders, piston rod, guide way,
are all treated with wear-resistance.
7. There are slanting wedges (compensation units) installed on the
top of tools. They could be adjusted by hand to meet the accuracy
requirements of work piece.
8. Deflection compensation unit is adopted under worktable for the
machine above 250Tons.
9. Full machine is guarded with safety guard with interlocker to
prevent the operator from injured.
1 two-hand control foot pedestal device
2.it is possible for special tooling with different lengths to bend
the closed frame workpiece
3.any tailor-made are available on request.